I am looking for words to differentiate between different orientations of cross sections. For example, an apple can be cut crosswise:

Source: Wikimedia Commons

Or lengthwise:

Source: Wikimedia Commons

What are the names for the (crosswise) cross section and the (lengthwise) cross sections?


2 Answers 2


Difference Between Longitudinal and Transverse Section

Longitudinal Section
When a vertical section is cut along the longest axis of an animal or a plant, the longitudinal cut is made. However, it is sometimes defined as the longest section cut in the vertical plane of an animal or a plant. ...
Transverse Section
Transverse section is a cut made in a plane that is made across the body of an animal, a plant, an organ, or a tissue. It is usually referred as the cut made between left and right.

Janel Simpson

(Janel Simpson)

  • Interesting! This conflicts with my bridge engineering experience but is clearly relevant for an apple.
    – AndyT
    Jul 19, 2017 at 15:17
  • It's relevant to bridge and every branch of engineering as well.
    – Kris
    Jul 21, 2017 at 6:46
  • Hmmm. For longitudinal section I agree that "cut along the longest axis" works for a longitudinal section of a bridge. The more I look at the definition you've found for transverse section, the more confused I get. A "cut between left and right" for an apple would match OP's "lengthwise", and the terms "left and right" don't really work for a bridge. I think the phrase "across the body" could work for a bridge transverse section, though it's not the clearest wording.
    – AndyT
    Jul 21, 2017 at 8:42
  • @AndyT Sections in engineering are more complex -- which is the reason there can be as many axes as one needs: Section X-X' typically. Also, the "axes" do not have to be horizontal or vertical but could be at any angle, as required.
    – Kris
    Jul 25, 2017 at 6:42


I propose plan section for a section on a horizontal plane, and sectional elevation for a section on a vertical plane.

According to Wikipedia's architectural drawing page:

A cross section, also simply called a section, represents a vertical plane cut through the object, in the same way as a floor plan is a horizontal section viewed from the top.

This would suggest that section is only appropriate for vertical planes. However, section is more generally defined as, per dictionary.com:

  1. a representation of an object as it would appear if cut by a plane, showing its internal structure.

Further, as a practising bridge engineer, I do not identify with the architectural definition of section only being in the vertical plane; I personally would also apply it to a cut in the horizontal plane. So I don't think it suffices for your purposes.

In my experience as a bridge engineer I often see the terms Longitudinal Section and Transverse Section. These are both sections in vertical planes. This works well for a bridge as it has longitudinal and transverse directions. Apples don't, so this doesn't really work for your situation.

An elevation is a view looking from the side. Per dictionary.com:

  1. Architecture. a drawing or design that represents an object or structure as being projected geometrically on a vertical plane parallel to one of its sides.

I would call a section cut, looking from the side, a sectional elevation. This may not be appropriate as it apparently has a slightly more specific definition, per Wikipedia:

A sectional elevation is a combination of a cross section, with elevations of other parts of the building seen beyond the section plane.

A plan view is looking at something from above. Wikipedia (top quote on this answer) likes floor plan for a section on a horizontal plane. Obviously an apple doesn't have a floor, but at least there seems to be some agreement on the word plan. Per dictionary.com plan means:

  1. Also called plan view. a drawing made to scale to represent the top view or a horizontal section of a structure or a machine, as a floor layout of a building.

In my personal experience the word plan on its own does not connotate a section, and means "without a section cut". I would therefore call a section cut, looking from above, a plan section.


Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge that you have read and understand our privacy policy and code of conduct.

Not the answer you're looking for? Browse other questions tagged or ask your own question.