I can't think of anything else to say. All I can find via Google is that it's because it's harder to create lather with hard water, but that doesn't seem very convincing to me.
Hard water contains minerals that actually harden. Over time, they form stains and crusts on the pipes and vessels they contact. If you look at the inside of pipes that have carried hard water for decades, there are thick stonelike coatings.
Soft water does not exhibit such behavior.
See a discussion of hard water deposits and scale here.
Hard water contains >160ppm of minerals (typically calcium compounds) and actually feels harder when drunk than soft water does (<160ppm). The earliest use in OED below would seem to support that origin rather than it being "hard" to form a lather.
The reasonable possibilities would seem to include:
Other qualities seem less likely; that it can sometimes taste nasty but the best-tasting waters are hard, that the waters of spas long considered to have health benefits are particularly hard, that it messes up modern central heating systems.
An interesting commentary on hard water from 1751, Francis Home's An Essay on the Contents and Virtues of Dunse-Spaw argues:
The interesting thing is how wrong they are! Now, they're clearly on the right mark in noting that salt of tartar and sea salt both have the hardening effect, but he's blaming sodium chloride for the hardness common to water, and not suspecting that it could be another salt again.
He defines "soft water" thus:
As we would expect, having found he does not have a clear picture of the cause of hardness, he focuses on the effect not the cause.
It would seem from this, and other texts of the time that scaling wasn't much considered. That soft water from rain sources was used in some cooking tasks could explain this, as it would reduce the amount of scaling witnessed, but also complicate the question of which water was resonsible. This also in itself speaks to the most likely origin of the word; he was not the only person to note the effect on "peaſe", but it was well-known to cooks (and remains culinary knowledge to this day).
(Alas I cannot find references for the belief that hard water blocks "pores" in vegetables, nor the advice to soak beans in soft but cook them in hard for better colour or favour, though I'd like to as the foodie in me likes the idea of the dedication that uses both well-water and rain-water for the same item [just add some salt! Jeez!]).
In all, while I could just about credit the ground = hard possibility, it seems that the effect on vegetables is the most likely source:
Soft water makes vegetables softer on boiling and soaking than hard, and very hard water can even harden some.
The earliest reference I could find (not including that Brooke reference, which I think is erroneous) is 1712 in the The Natural History of Northamptonshire by John Morton. He says:
Harsh water actually seems to be an earlier term for the same thing, being found as early as 1667 in The History of the Royal-Society of London, for the Improving of Natural Knowledge by Thomas Sprat (earlier if you count the l'eau aspre) and being the opposite of soft water. Perhaps hard water was derived from soft water as being more clearly its opposite.
There is an actual difference in the feel of hard and soft water. Soft water feels softer and flows differently from hard water.
I live in a place with very hard water. When I travel to places with soft water, I notice this difference right away when I turn on the tap.
The 'tough to work up a lather' sense is right, though not quite so literally. The hardness and softness refer, in this case, to the words' scientific senses- to how "hard", or "soft", the surface of the water is.
(I'm afraid this answer really is more school-level scientific explanation than erudite etymology, but here it is :-)
The conventional method -till the early part of the 20th century, at least- to determine hardness of water was to add a little soap/soap solution/soap oil to a water sample and work up a lather (typically by vigorously shaking a cone-shaped beaker to which a drop of soap liquid had been added. The practice continues in many school science fairs to date- presumably because it is simple and requires no fancy scientific equipment).
How easily -or not- water lathers depends on how hard, or soft, the water,or more precisely, its surface is. The "hardness" or "softness" of the surface of water is referred to as Surface Tension-this is what "holds water together" - an index of how adhesive/cohesive water molecules are to each other. For soap to dissolve, it has to first overcome the surface tension of water.
Surface Tension is also what enables a water-strider to walk on water (visual demo and interesting article here)
If the surface tension is high, or if the surface is "hard", the soap and the water don't readily mix, which means the water doesn't lather easily, and you have water that can be termed hard. On the other end of the hardness index/scale, obviously, we have soft, referring to how easily the soap additive breaks the surface, permeates the water, and turns into lather.
EDIT : Here's another reference link that explains the same concept in brief-http://answers.ask.com/Science/Chemistry/what_is_water_hardness
Ever tried washing your hair in soft water? I did when I lived in a tiny Italian village whose source of water came directly from the nearby mountains. My hair never felt softer. And I'm pretty sure that clothes and linen felt softer too.
Now I live in a city centre, and my British kettle has that thick, hard greyish limescale; the taps have that tough residue of calcium around the spout, which is really difficult to shift, and the bathroom radiator hisses because of deposit and sludge slowly building up.
Why is water called hard or soft? The deposit of calcium or limescale is hard to the touch, and a challenge to get rid of. Whereas, soft water aptly describes the gentleness and kindness it has on our skin, hair and digestive systems. (Minestrone tastes better too, cooked in soft water, see Jon Hanna's answer.)
Well, that's my theory. I have no back up to support my assertions.
protected by RegDwigнt♦ Feb 14 '13 at 12:43
Thank you for your interest in this question.
Because it has attracted low-quality answers, posting an answer now requires 10 reputation on this site.
Would you like to answer one of these unanswered questions instead?